As an Amazon Associate I earn from qualifying purchases.1. PNGKNYOCN
PNGKNYOCN 40cm USB to Dual 3-Pin / 4-Pin PWM 5V USB Sleeved Fan Power Adapter Cable, with ON/Off Toggle2-Pack
PNGKNYOCN - Use the usb power connector to run 2 pcs PC case fans at 5V voltage at the same time. Fan must have a start voltage at or below 5V Fans with higher starting voltage will not work properly. Connector a: usb male, b: 3x fan connectors Actually only 2 pins are energized.
Molded plastic rocker switches can quickly and comfortably turn your fan on or off. Note: it has no PWM speed measurement function. Usb to fan adapter cable is suitable for all 4-pin and 3-pin case fans.
2. winwill
Winwill 3 Pack 5V USB to 3pin / 4Pin PC Fan Cable,Black USB to Computer CPU PWM 5V USB Sleeved Fan Power Adapter connector 11.8 Inch Fan Adapter Cable
winwill - Application it can be used to power the pc case fan, CPU fan, 5V small 3 or 4Pins fan with a computer USB port or DIY modified laptop cooling pad fan.
Suitable voltage the fan must have a start voltage at or below 5V fans with a higher start voltage will not work 12V fans will be operated at a reduced 5V voltage for silent operation.
Connectorone is usb port, the other one is small 3 or 4 pins case fan power adapter cable port. Cable lengththe cable length is 11. 8 inch which is suitable for mostly computer CPU fan. High quality material:It adopts high quality and high density black sleeved cable, pure copper conductor.
3. LINKUP
LINKUP, 2 Packs USB to 3/4-P PWM 5V┃CPU/Case Fan Sleeved Power Cable Adapter┃USB 2.0, 3.1, 3.0
LINKUP - Shielded cableWrapped in high quality braided material. Type-c ports not supported. Simple installpower up your case or cpu fan with the available usb 2. 0/3. 0 port, delivers up to 2. 5w usb 2.
0 or 4. 5w usb 3. 0 of power. 5v power deliverycapable of powering most PWM case and CPU fans at 12V, 7V, or 5V. Linkup cares!backed by a linKUP Limited Warranty and complimentary premium online support. 26” lengthlong enough to install most fans and route easily to a USB port.
| Brand | LINKUP |
| Manufacturer | LINKUP Technology Inc. |
| Height | 2 cm (0.79 Inches) |
| Length | 9 cm (3.54 Inches) |
| Width | 10 cm (3.94 Inches) |
| Part Number | PWR U2AM-PWM-5-2PK |
4. Bodhi200
Bodhi200 USB to 4-Pin PWM 5V USB Sleeved Fan Power Adapter Cable, USB to 4 Pin Case Fan Adapter Connector Cable
Bodhi200 - Cable length: 40cm/15. 71" approx. Usb male to 4 pin fan adapter cable, used on PC case. Conductor specification: 17x014ts; wire outer Diameter: OD3. 5mm. Only support 5V low vlotage starting. Material: pVC + Copper.
5. PNGKNYOCN
With ON/Off Toggle2-Pack）, PNGKNYOCN 30cm USB to 3-Pin / 4-Pin PWM 5V USB Sleeved Fan Power Adapter Cable
PNGKNYOCN - Use the usb power connector to run the PC case fan at 5V. Note: there is no PWM speed measurement function. Usb to fan adapter cable is suitable for all 4-pin and 3-pin case fans.
Molded plastic rocker switches can quickly and comfortably turn your fan on or off. Connector a: usb male, b: 3x fan connectors Actually only 2 pins are energized. Fan must have a start voltage at or below 5V fans with a higher start voltage will NOT work.
6. Gelid Solutions
Gelid Solutions 1-to-4 PWM USB Hub Connect 1 motherboard PWM fan header to up to 4 fans, compatible with all 3 and 4-pin PWM fans
Gelid Solutions - 1 x 4-pin female pwm connector/output: 4 x 4-pin female PIN connector. You can easily expand a PWM fan header of the motherboard to connect up to 4 fans.
1 to 4 pwm fan hub. Compatible with all 3 pin and 4 pin PWM fans With sleeve wiring for seamless cable management and pre-fitted adhesive tape for easy installation.
7. Xiatiaosann
Xiatiaosann 10 PCS USB to 3/4-Pin PWM PC Fan, USB Type-A Male to 3-Pin 4-Pin PC 5V PC Fan Adapter Cable for Power Supply to 5V PC Fan
Xiatiaosann - 1 x 3 pin / 4 pin pc fan power head actually only 2 pins, but compatible with 3 pin / 4 pin PC fan. Pc fan with 12V is not applicable. Connector: 1 x usb type-a male head. Application: desktop computer, notebook computer, USB adapter.
Voltage requirement: the voltage of this cable only supports 5V, which is only suitable for PC fans working at 5V. Perfect cable length: the cable total length is 30cm, long enough for most PC Case. Usage: the usb type-a male head allows you to connect it to the USB socket of the case to power the 3 pin / 4 pin PC fan.
8. Eujgoov
USB to I2C Adapter ABS USB to IIC GPIO PWM ADC Converter Module for IIC Bus Data Transmission and Storage Support AndroidAndroid
Eujgoov - Wide compatibility: this adapter supports for Linux, for Windows, for Android and more major systems. Working details: with usb power supply, there is no external power supply required, current up to 500mA, 5V and 3.
3v power output, with short circuit protection. Support for pmbus for smbus: this adapter provides a library of interface functions specifically for PMBus and SMBus, The adapter possesses impact resistance, scratch resistance, very practical! Abs material: using excellent ABS material, environmentally friendly.
Bidirectional conversion available: this adapter can be used as I2C bus host or slave to realize bidirectional adaptation conversion between USB and I2C bus.
9. Walfront
Universal USB to I2C/IIC Interface Adapter Converter Support for Linux Windows Android USB To IIC/GPIO/PWM/ADC
Walfront - Support for pmbus for smbus: this adapter provides a library of interface functions specifically for PMBus and SMBus, scratch resistance, The adapter possesses impact resistance, very practical! Abs material: using excellent ABS material, environmentally friendly.
Wide compatibility: this adapter supports for Linux, for Windows, for Android and more major systems.
Working details: with usb power supply, 5v and 3. 3v power output, current up to 500mA, there is no external power supply required, with short circuit protection. Bidirectional conversion available: this adapter can be used as I2C bus host or slave to realize bidirectional adaptation conversion between USB and I2C bus.
10. Kadimendium
For Android, for Windows, USB To I2C Adapter USB to IIC GPIO PWM ADC Universal ABS USB To I2C Converter Module for Linux
Kadimendium - Complete set: package list:1 x usb to i2c adapter. 1 x usb cable. 2 x jump Wire. 10 x test clip, complete set for easy installation, no need for additional tool or accessory.
With power supply: there is no external power supply required, 5V and 3. 3v power output, current up to 500mA, with short circuit protection. Abs material: using excellent abs material, scratch resistance, environmentally friendly, The adapter possesses impact resistance, reliable structure protects the internal components from damage.
Wide compatibility: this adapter supports for Linux, for Android and more major systems, provides a library of interface functions specifically for PMBus and SMBus, for Windows, very practical!. Bidirectional conversion available: This adapter can be used as I2C bus host or slave to realize bidirectional adaptation conversion between USB and I2C bus.
PNGKNYOCN - Use the usb power connector to run 2 pcs PC case fans at 5V voltage at the same time. Fan must have a start voltage at or below 5V Fans with higher starting voltage will not work properly. Connector a: usb male, b: 3x fan connectors Actually only 2 pins are energized. Molded plastic rocker switches can quickly and comfortably turn your fan on or off. Note: it has no PWM speed measurement function. Usb to fan adapter cable is suitable for all 4-pin and 3-pin case fans.
winwill - Application it can be used to power the pc case fan, CPU fan, 5V small 3 or 4Pins fan with a computer USB port or DIY modified laptop cooling pad fan.
LINKUP - Shielded cableWrapped in high quality braided material. Type-c ports not supported. Simple installpower up your case or cpu fan with the available usb 2. 0/3. 0 port, delivers up to 2. 5w usb 2. 0 or 4. 5w usb 3. 0 of power. 5v power deliverycapable of powering most PWM case and CPU fans at 12V, 7V, or 5V. Linkup cares!backed by a linKUP Limited Warranty and complimentary premium online support. 26” lengthlong enough to install most fans and route easily to a USB port.
Bodhi200 - Cable length: 40cm/15. 71" approx. Usb male to 4 pin fan adapter cable, used on PC case. Conductor specification: 17x014ts; wire outer Diameter: OD3. 5mm. Only support 5V low vlotage starting. Material: pVC + Copper.
Gelid Solutions - 1 x 4-pin female pwm connector/output: 4 x 4-pin female PIN connector. You can easily expand a PWM fan header of the motherboard to connect up to 4 fans. 1 to 4 pwm fan hub. Compatible with all 3 pin and 4 pin PWM fans With sleeve wiring for seamless cable management and pre-fitted adhesive tape for easy installation.
Xiatiaosann - 1 x 3 pin / 4 pin pc fan power head actually only 2 pins, but compatible with 3 pin / 4 pin PC fan. Pc fan with 12V is not applicable. Connector: 1 x usb type-a male head. Application: desktop computer, notebook computer, USB adapter. Voltage requirement: the voltage of this cable only supports 5V, which is only suitable for PC fans working at 5V. Perfect cable length: the cable total length is 30cm, long enough for most PC Case. Usage: the usb type-a male head allows you to connect it to the USB socket of the case to power the 3 pin / 4 pin PC fan.
Eujgoov - Wide compatibility: this adapter supports for Linux, for Windows, for Android and more major systems. Working details: with usb power supply, there is no external power supply required, current up to 500mA, 5V and 3.
Walfront - Support for pmbus for smbus: this adapter provides a library of interface functions specifically for PMBus and SMBus, scratch resistance, The adapter possesses impact resistance, very practical! Abs material: using excellent ABS material, environmentally friendly.
Kadimendium - Complete set: package list:1 x usb to i2c adapter. 1 x usb cable. 2 x jump Wire. 10 x test clip, complete set for easy installation, no need for additional tool or accessory.
