Top 10 Taps and Dies UK – Taps & Dies

As an Amazon Associate I earn from qualifying purchases.



Ser A Full Length Die Set 204Rugr

RCBS #ad - Series a full length die Set. Type: 2 die Set. Made from case hardened steel. International products have separate terms, age ratings, are sold from abroad and may differ from local products, including fit, and language of product, labeling or instructions. Fits: 204 Ruger.
BrandRCBS #ad
ManufacturerRCBS #ad
Height5.08 cm (2 Inches)
Length15.24 cm (6 Inches)
Width12.7 cm (5 Inches)
Part Number10301

2. Posi-Products


Posi Taps Sampler Pack 20, 14-16

Posi-Products #ad - 2 of each posi tap with a extra 2 Posi-Tap Mini 24-26 ga. Reusable or Permanent / Less resistance. For a total of 20 Taps. Posi-tap sampler pack. Installs in seconds by hand while requiring no crimping or tools. Posi taps taps wires without cutting / Total wire integrity is Maintained. Vibration proof / fully insulated / Power up to 4 leads at once. Delivered in E. H. C reusable sealed bags.
BrandPosi-Products #ad
ManufacturerPosi-Products #ad

3. toolant


4.1mm Drill Bit Combo for Threading, Tap and Die Set M5x0.9 Thread, 3pcs

toolant #ad - The drill bit is made of HSS, 65HRC hardness;. Tap and die are made of premium alloy steel, which can achieve a hardness of up to 63HRC. Tap and die set with drill bit Combo -- save customers' time in selecting the correct drill bits;.
Brandtoolant #ad
Manufacturertoolant #ad
Part NumberTap and Die Set
Modeltap die set

4. Joleully


Joleully M14 x 1.25mm HSS Metric Tap And Die Set Thread Tap And Round Thread Die Right Hand HSS Taper Silver Tone 2Pcs

Joleully #ad - Application: use for carbon steel, alloy steel and cast iron, such as through hole processing. Product name: Tap and Die Set. Package contents: 1Pcs x Tap, 1Pcs x Die. Size: m14 x 1. 25mm, pitch:1. 25mm. Materia: hssHigh Speed Steel.
BrandJoleully #ad
ManufacturerSHENGQING #ad
Part NumberCF2115-CF2133

5. Bosch


28 High-Carbon Steel Fractional Plug Tap, Bosch BPT14F28 1/4 in.

Bosch #ad - Plug taps – engineered for cutting right-hand internal threads. Heat-treated carbon steel – provides superior durability and speed. Rolled threads – deliver more accuracy and are cleaner than machined threads.
BrandBosch #ad
ManufacturerC & J Direct GmbH & Co. KG #ad
Part NumberBPT14F28

6. uxcell


Uxcell Machine Tap #2-56 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs

uxcell #ad - With uncoated base substrate only, high strength and hardness, suitable for general purpose tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.

Thread tap: thread size: #2-56 unc; class: 2b; thread length: 12mm / 047 inch; shank side Width: 2mm / 008 inch; total length: 46mm / 1. 81 inch. Wide applications: the thread tap is suitable for drilling mild steels, stainless steel, copper, hard plastic, iron, aluminum, processing through holes or shallow holes. Machine taps: used in drilling machines, machining centers, CNC, milling machines, automatic machines, tapping machines, not recommended for hand and electric drill tapping.

Straight flute tap: straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. High speed steel tap: the screw tap has high wear resistance, fast cutting speed, and long service life. Add appropriate tapping oil for higher quality internal threads and more durable taps.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera23102400ux1321



For Tap Die Extraction, Hanson 1448 Tap 9/16"-12 NC Plug

IRWIN #ad - International products have separate terms, age ratings, and language of product, including fit, are sold from abroad and may differ from local products, labeling or instructions. Each plug tap features straight flutes that are ground for rapid chip removal. 9/16" - 12 nc with a plug tap point. This plug tap produces a class 2B thread. Designed for hand-threading work in a variety of materials.
BrandIRWIN #ad
ManufacturerIrwin #ad
Height1.78 cm (0.7 Inches)
Length8.13 cm (3.2 Inches)
Width8.38 cm (3.3 Inches)
Part Number1448

8. Drill America


1/2" and 3/4", Drill America POUCSNPT5 5 Piece Carbon Steel NPT Pipe Tap Set, 1/4", 3/8", 1/8"

Drill America #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts. Npt pipe taps, 3/8"-18 npt, 1/2"-14 npt, sizes 1/4"-18 npt, 3/4"-14 nPT carbon steel Pipe taps in plastic pouch case. Round shank with square end. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
BrandDrill America #ad
ManufacturerDrill America #ad
Part NumberPOUCSNPT5

9. C.K


Red, CK Re-Threading Tool M3.5x0.6

C.K #ad - A tough impact resistant handle. High speed steel tap for a clean cut and long life. Size: m3. 5 and 06 mm thread Pitch. Specially designed for clearing dirt and debris from patters screw tabs. Precision ground threads for accurate threading and a 50 mm long tap length for improved access.
BrandC.K #ad
ManufacturerC.K #ad
Weight0.04 kg (0.09 Pounds)
Part Number495028-CK TOOLS_IT
Warranty1 year.

10. GearWrench


3887, Silver, GEARWRENCH 77 Piece Ratcheting Tap and Die Set, SAE/Metric

GearWrench #ad - Die adapter works on round and hex shaped dies. Auto-locking feature allow the tap adapters to be removed safely. Spring-loaded cap allows for quick release of large tap adapter.

Drive extension adapters provide greater access in confined areas when used with 3/8" Drive extensions. Ratcheting t-wrench works with GEARWRENCH pass-thru socket system. Blow mold carrying case with tilted tap holders for easy access and storage. Twist lock guide system reduces the walk back" of the die guide and keeps the dies centered while cutting. Ratcheting t-handles wind dies with a 5 swing arc and have a reversing lever to eliminate hand-over-hand turning. Die adapters work with the 3/8" Drive pass-thru ratchet and socket system as well as socket accessories.
BrandGearWrench #ad
ManufacturerGearWrench #ad
Part Number3887